Aerospace and Power Generation Parts, Stainless Steels
18/12/19
* The process is simplified here.
No. Process | Tool | Tool size | Vc m/min | n min-1 | Vf mm/min | fz mm/t | Max. ap×ae mm |
| EPSM4120-R0.5-PN | Ø12×R0.5 | 120 | 3,183 | 535 | 0.042 | 6×1 |
| EPSM4120-R2.0-PN | Ø12×R2.0 | 120 | 3,183 | 535 | 0.042 | 8×0.5 |
This is the Point!
Enables long tool life even with thin-walled cantilever clamps.
Cutting method
- Roughing: Side roughing with fixed 5-axis cutting
- Blade surface roughing/finishing: Mainly simultaneous 5-axis cutting was performed using a radius end mill for all cutting.
For both processes and , cutting was performed using only a single tool.
Tool to achieve this...
Epoch SUS Multi
EPSM-PN
